Ara
Toplam kayıt 45, listelenen: 21-30
Exergetic Analysis of Using Gaseous Fuels in Spark Ignition Engines
(Journal of Thermophysics and Heat Transfer (The American Institute of Aeronautics and Astronautics), 2014)
This paper aims to investigate the use of alternative gaseous fuels in spark ignition engines via an exergy analysis.A quasi-dimensional two-zone thermodynamic cycle model is used for this purpose. The intake and exhaust ...
Exergetic Analysis of Using Oxygenated Fuels in Spark-Ignition (SI) Engines
(Energy & Fuels (ACS Publications), 2009)
In this study, the use of the oxygenated fuels in spark-ignition (SI) engines has been investigated by means of exergy analysis. For this purpose, a two-zone quasi-dimensional thermodynamic cycle model was used. The cycle ...
Exergy Analysis of SI Engines
(International Journal of Exergy (Inderscience Publishers), 2008)
In this study, exergy (availability) analysis of a Spark Ignition (SI) engine has been performed theoretically during compression, combustion and expansion processes of the engine cycle. For this purpose, a thermodynamic-based ...
GÜN İÇERİSİNDEKİ GÜNEŞ IŞINIMININ KAPALI ORTAMLARDAKİ DOĞAL TAŞINIMLA ISI TRANSFERİ ÜZERİNE ETKİLERİNİN SAYISAL İNCELENMESİ
(Türk Tesisat Mühendisleri Derneği, 2008-05-12)
İki boyutlu kapalı ortamlarda yaz ve kış sınır koşullarında, güneş ışınımından kaynaklanan doğal taşınımla ısı transferi sayısal olarak incelenmiştir. Işınım alan yüzey için zamana bağlı periyodik olarak değişen bir sıcaklık ...
Investigation of the Effect of Dual Ignition on the Exhaust Emissions of an SI Engine Operating on Different Conditions by Using Quasi-dimensional Thermodynamic Cycle Model
(Strojarstvo (Croatian Union of Mechanical Engineers and Naval Architects), 2009)
In the presented study, the effects of using dual-spark plug and variation of the spark plug location on the exhaust emissions of an SI engine operating in different conditions were investigated theoretically. A quasi-dimensional ...
Comparison of Mechanical Properties Obtained for Armor Steels: Conventional Methods vs. Nanoindentation
(ASTM International, 2023)
The mechanical properties of three armor steels, namely Ramor 500, Ramor 550, and Armox Advance, were acquired by nanoindentation and conventional methods, and then the results were compared. To this goal, samples were ...
Kapalı Kare Ortamlarda Periyodik Olarak Değişen Sıcaklığa Sahip Duvara Konulan Engelin Doğal Taşınım ile Isı Transferi Üzerine Etkilerinin Sayısal İncelenmesi
(6th International Advanced Technologies Symposium, 2011-05-16)
Natural convection heat transfer in square enclosures having a horizontally positioned obstacle on one of the vertical wall is numerically investigated. The obstacle included wall has periodically varying temperature profile ...
Mathematical analysis of spark ignition engine via the combination of the first and second laws of thermodynamics
(Proceedings of Royal Society A-Mathematical Physical & Engineering Sciences (Royal Society Publishing), 2008)
This study aims at the theoretical exergetic evaluation of spark ignition engine operation. For this purpose, a two-zone quasi-dimensional cycle model was installed, not considering the complex calculation of fluid motions. ...
NATURAL CONVECTION HEAT TRANSFER IN A PARTIALLY DIVIDED TRAPEZOIDAL ENCLOSURE
(THERMAL SCIENCE, 2009)
Nat u ral con vec tion heat trans fer in a par tially di vided trap e zoidal en clo sure is stud ied nu mer i cally us ing the con trol vol ume method. Sum mer and win ter con di - tions are sep a rately ex am ined by im ...
Preparation and characterization of electroless Ni–B/nano-SiO2, Al2O3, TiO2 and CuO composite coatings
(2015-06-18)
Ni–B/SiO2, Al2O3, TiO2 and CuO composite coatings were successfully obtained by the electroless plating technique. Dispersible SiO2, Al2O3, TiO2 and CuO nanoparticles were co-deposited with electroless Ni–B coating onto ...