Modified REL-Based Piecewise Path Loss Modeling Approach for Shore-to-Ship Communication at 5.6 GHz

Access
info:eu-repo/semantics/openAccessDate
November 2Access
info:eu-repo/semantics/openAccessMetadata
Show full item recordCitation
Scopus EXPORT DATE: 10 March 2025 @ARTICLE{Eyuboglu2024, url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85210236985&doi=10.3390%2fapp142210324&partnerID=40&md5=c2153380823698299bebafa135d200cf}, affiliations = {Department of Maritime Transportation and Management Engineering, Karadeniz Technical University, Trabzon, 61600, Turkey; Department of Electronics and Communications Engineering, Karadeniz Technical University, Trabzon, 61830, Turkey; Department of Electronic and Automation, Gumushane University, Gumushane, 29600, Turkey; Department of Electrical and Electronics Engineering, Karadeniz Technical University, Trabzon, 61080, Turkey}, correspondence_address = {Z. Hasirci Tugcu; Department of Electronics and Communications Engineering, Karadeniz Technical University, Trabzon, 61830, Turkey; email: zhasirci@ktu.edu.tr}, publisher = {Multidisciplinary Digital Publishing Institute (MDPI)}, issn = {20763417}, language = {English}, abbrev_source_title = {Appl. Sci.} }Abstract
The need for reliable and uninterrupted communication systems in the marine environment has become critically important with increasing maritime activities, environmental monitoring, and the spread of autonomous systems. However, the complex structure of electromagnetic wave propagation in a sea environment limits the accuracy of the existing propagation models. Thus, the Modified Round Earth Loss (REL) model was first developed in this study to estimate the path loss more accurately in shore-to-ship communication. Subsequently, a piecewise modeling approach based on the principle of two-segment data modeling was proposed. In the Modified REL model, unlike the traditional REL model, the paths and gains of the direct and reflected waves were not considered equal in the calculations. Moreover, unlike in the classical approach, the receiver height was not taken as a fixed value; the estimated best receiver height value for each measurement was included in the calculations as a representation of the effect of roughness in the sea environment. Thus, the model is better adapted to various environmental conditions. In addition, the proposed piecewise model divides the propagation medium into two regions using a break point calculated by Fresnel zone theory. The Modified REL model was used for the first region and the log-distance model was used for the second region. This method allows for more accurate modeling of signal behaviors, especially at different distances. Experimental measurements and performance evaluations conducted using four different shore-to-ship communication scenarios show that the Modified REL model shows an average improvement of up to 3% in Root Mean Square Error (RMSE) values compared to the classical REL model. Additionally, the proposed piecewise model improves the fitting error of the Modified REL model, which models the data as a single whole, by an average of 22.25%. These findings emphasize the necessity of propagation models that are sensitive and adaptable to environmental changes for maritime communication. © 2024 by the authors.
Volume
14Issue
22URI
scopus.com/record/display.uri?eid=2-s2.0-85210236985&origin=SingleRecordEmailAlert&dgcid=raven_sc_affil_en_us_email&txGid=c1bf6ccfb215617d3d0aaf2dbf88cf98https://hdl.handle.net/20.500.12440/6445