Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorAkpinar, Salih
dc.contributor.authorAydin, Murat Demir
dc.contributor.authorOzel, Adnan
dc.date.accessioned2021-11-09T19:48:36Z
dc.date.available2021-11-09T19:48:36Z
dc.date.issued2013
dc.identifier.issn0307-904X
dc.identifier.issn1872-8480
dc.identifier.urihttps://doi.org/10.1016/j.apm.2013.06.008
dc.identifier.urihttps://hdl.handle.net/20.500.12440/3674
dc.description.abstractIn this study, the normal (sigma(x), sigma(y), sigma(z)) and shear stress (tau(xy), tau(yz), tau(zx)) distributions occurring in a bi-adhesively bonded T-joint with was investigated via a non-linear three dimensional finite element analysis. For this purpose, first of all, using 2024-T3 aluminum alloy as the adherend and the support, a two-part paste (DP 460) and a film type (SBT 9244) as adhesive, two different types of T-joint samples (single-adhesively bonded T-joint and bi-adhesively bonded T-joint) were produced for experimental studies. After experimental studies on the three different T-joint types were conducted, stress analyses in the T-joints were performed with a three-dimensional finite element analysis by considering the geometrical non-linearity and the material non-linearities of the adhesive (DP460 and SBT9244) and adherend (AA2024-T3). Finally, for a given adherend, the lower the stiffness of the adhesive used in the overlap, the lower the stress concentration, leading to potentially higher joint strength. The use of relatively low stiffness adhesives at the ends of the overlap in a hi-adhesive can decrease the stress concentration and, therefore, potentially lead to higher joint strength. (C) 2013 Elsevier Inc. All rights reserved.en_US
dc.language.isoengen_US
dc.publisherElsevier Science Incen_US
dc.relation.ispartofApplied Mathematical Modellingen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAdhesiveen_US
dc.subjectNon-linear finite elementen_US
dc.subjectThree-dimensional effectsen_US
dc.subjectT-jointen_US
dc.titleA study on 3-D stress distributions in the bi-adhesively bonded T-jointsen_US
dc.typearticleen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.description.wospublicationidWOS:000328806000028en_US
dc.description.scopuspublicationid2-s2.0-84887400998en_US
dc.departmentGümüşhane Üniversitesien_US
dc.authoridAKPINAR, Salih / 0000-0003-3247-991X
dc.authoridOZEL, Adnan / 0000-0001-8527-3136
dc.authoridAYDIN, MURAT DEMIR / 0000-0002-2287-2198
dc.identifier.volume37en_US
dc.identifier.issue24en_US
dc.identifier.startpage10220en_US
dc.identifier.doi10.1016/j.apm.2013.06.008
dc.identifier.endpage10230en_US
dc.authorwosidAKPINAR, Salih / ABC-1348-2020
dc.authorwosidDemir, Murat / AAD-8032-2021
dc.authorwosidAkpinar, Salih / AAE-7725-2019
dc.authorscopusid55387708100
dc.authorscopusid57216814129
dc.authorscopusid7005713501


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster