Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorEkmekci, Dursun
dc.contributor.authorCora, Omer Necati
dc.date.accessioned2021-11-09T19:42:44Z
dc.date.available2021-11-09T19:42:44Z
dc.date.issued2020
dc.identifier.issn0947-8396
dc.identifier.issn1432-0630
dc.identifier.urihttps://doi.org/10.1007/s00339-020-04095-z
dc.identifier.urihttps://hdl.handle.net/20.500.12440/3459
dc.description.abstractThe goal of this study was to acquire mechanical properties of a dual-phase grade advanced high strength steel (AHSS) by means of different microindentation loading conditions. Conventional, cyclic, and multi-step indentations were performed on DP 800 sample; and Young's modulus, hardness values were obtained by the depth-sensing indentation technique. Effects of different load levels (50-300 mN) and type of indentation on the results were also analyzed through ANOVA. The load levels experimented yielded overall material response rather than its constituents (e.g., martensite and ferrite). Both hardness and Young's modulus tend to decrease with increasing maximum indentation load level, especially from 50 to 100 mN, which is regarded as indentation size effect.en_US
dc.description.sponsorshipScientific and Technological Council of Turkey (TUBITAK)Turkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [218M913]en_US
dc.description.sponsorshipThis work was partially supported by The Scientific and Technological Council of Turkey (TUBITAK) under Grant No. 218M913. The authors are also grateful to Prof. Dr. Uur Kolemen and Assoc. Prof. Dr. Fikret Ylmaz of Gaziosmanpaa University for sharing their lab capabilities and their assistance in microindentation tests. We extend our gratitude to SSAB for providing test materials used in this study.en_US
dc.language.isoengen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofApplied Physics A-Materials Science & Processingen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMicroindentationen_US
dc.subjectAHSSen_US
dc.subjectDual phase steelen_US
dc.subjectHardnessen_US
dc.subjectYoung&#8217en_US
dc.subjects modulusen_US
dc.titleEffect of indentation loading type on the mechanical properties of advanced high strength steel grade DP 800en_US
dc.typearticleen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.description.wospublicationidWOS:000590039600002en_US
dc.description.scopuspublicationid2-s2.0-85094941506en_US
dc.departmentGümüşhane Üniversitesien_US
dc.authoridCORA, Omer Necati / 0000-0003-3564-5493
dc.identifier.volume126en_US
dc.identifier.issue11en_US
dc.identifier.doi10.1007/s00339-020-04095-z
dc.authorwosidCORA, Omer Necati / AAE-7136-2020
dc.authorscopusid56925320400
dc.authorscopusid25926994400


Bu öğenin dosyaları:

DosyalarBoyutBiçimGöster

Bu öğe ile ilişkili dosya yok.

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster