Bölüm "Meslek Yüksekokulları, Gümüşhane Meslek Yüksekokulu, Elektrik ve Enerji Bölümü" için listeleme
Toplam kayıt 16, listelenen: 1-16
-
Comparative study of critical current density, pinning force and levitation force behavior in Yb211 doped-Sm123 bulk superconductors
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2012-04-15)The effect of Yb211 doping on the critical transition temperature (T-c), c-lattice parameter, critical current density (J(c)), volume pinning force (F-p) and the vertical levitation force density properties of MPMG-processed ... -
Comparison of levitation force relative to thickness of disk shaped YBa2Cu3O7-x prepared by MPMG and FQMG processes
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2009-11-20)The precursor YBCO in the stoichiometric ratio of 1:23 were fabricated using the melt-powder-melt-growth (MPMG) technique, and flame-quench-melt-growth (FQMG) technique. The superconducting regions were determined by ... -
Complete flux jumping in nano-structured MgB2 superconductors prepared by mechanical alloying
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2009-07-08)High density nano-crystalline MgB2 bulk superconductors with induced pinning centres were prepared from elemental precursors by a sequence of ball milling, heat treatment, and final pressing. The XRD results revealed the ... -
The Effect of Excess Y2O3 Addition on the Mechanical Properties of Melt-Processed YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2010-12)In this study, two kinds of melt-processed YBCO samples with Y2O3 addition were fabricated and their microstructures were defined by XRD analysis and polarized light optical microscopy. The mechanical properties of these ... -
The effect of fabrication method on physical properties of different Y211 and 20% Ag2O added YBCO sample
(Springer, 2023)In this study, it is aimed to investigate the effects of production methods on the physical properties of 20% Ag2O and different ratios of Y211 added YBCO samples. In this context, the samples with Y123 + x % (x = 20, 25, ... -
The effect of the Y2O3 buffer layer on the microstructural and physical properties of melt-processed Y358 superconductor
(Springer, 2023)The Y3Ba5Cu8O18 (Y358) superconductors were produced using the Melt-Powder-Melt-Growth (MPMG) method. In the crystal growth process, Y2O3 powder was used as a substrate in both powder and tablet form. The first sample was ... -
The Effect of Y2O3 Buffer Layer on the Magnetic Properties of Melt-Processed YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-07)In this study, two kinds of melt-processed YBCO samples (Y1050-1 and Y1050-2) grown on a buffer layer of Y(2)O(3) addition were fabricated. The compacted powders were located on a crucible with Y(2)O(3) powder freely poured ... -
The Effect of Y2O3 on AC Susceptibility Measurements of MPMG YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2013-04)In this study, two kinds of melt-powder-melt-growth (MPMG) YBCO sample grown on a buffer layer of Y2O3 addition were fabricated. The compacted powders were located on a crucible with Y2O3 powder freely poured and a buffer ... -
Effects of Sintering Temperature on Microstructure and Magnetic Properties of Nd–Fe–B Magnets
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2013-05)The sintered Nd-Fe-B (neodymium-iron-boron) magnet has been used for many applications in various fields such as acoustics, communications, and automation due to its excellent properties including high remanence, high ... -
Fabrication and properties of dense ex situ magnesium diboride bulk material synthesized using spark plasma sintering
(IOP PUBLISHING LTD, DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND, 2009-09)High density ex situ magnesium diboride bulks were synthesized from commercial MgB(2) powder using spark plasma sintering under a range of applied uniaxial pressures between 16 and 80 MPa. The microstructure was characterized ... -
Levitation force at different temperatures and superconducting properties of nano-structured MgB2 superconductors
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2010-03-04)The levitation and pinning force properties of nanocrystalline MgB2 superconductors prepared by a mechanical alloying technique with varying milling duration have been investigated. Levitation force measurements under ... -
The Magnetic and Structural Properties of SiC-Doped MgB2 Bulks Prepared by the Standard Ceramic Processing
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-01)According to general formula MgB2-x SiC (x) (x=0,0.05,0.1,0.2), MgB2 and SiC-doped bulk superconductors were prepared by the standard ceramic processing. The mixtures of the corresponding powders were sintered at 750 degrees ... -
Magnetic Characterization of SiC Doped Bulk MgB2 Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-01)Flux pinning is a very significant mechanism to improve critical current density in MgB2 for many applications, such as developing the performance of wires and tapes. In this study, we have done a systematic study of SiC ... -
Magnetic Properties of YBCO Single-Crystal Grown on Y2O3 Layer by a Cold Top-Seeding Method
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2012-02)In this work, single-crystal samples 20 mm in diameter were grown by a cold top-seeding method. In order to study the effect of an Y2O3 buffer layer, a compacted precursor was located in a crucible on a buffer layer of ... -
Optimizing Advanced High-Strength Steel Joints via Regional Rapid Cooling in Resistance Spot Welding
(John Wiley and Sons Inc, 2024)During resistance spot welding (RSW), the thermal cycles that occur cause microstructural differentiations in the heat-affected zones of martensitic steels, leading to internal stresses. In this context, a new and innovative ... -
Superconducting Properties of Welded Three Top-Seeded YBa2Cu3O7−x Produced with NdBCO/YBCO/MgO Thin-Film Seed
(John Wiley and Sons Inc, 2024)This study investigates hollow single-crystal top-seeded melt growth (TSMG) YBa2Cu3O7−x (YBCO or Y123) samples welded with Ag-added TSMG YBCO solder materials produced using NdBCO/YBCO/MgO thin-film seeds. Three main samples ...