Yazar "Beder, Murat" için listeleme
-
Çözündürme ve Yaşlandırma İşleminin Al-7Si-4Zn-3Cu Alaşımının Sürtünme ve Aşınma Özelliklerine Etkisi
Alemdağ, Yasin; Beder, Murat (2019)Bu çalışmada, çözündürme ve su verme işleminden sonra T6 ve T7 koşullarında yaşlandırma işlemine tabi tutulan Al-7Si-4Zn-3Cu alaşımının sürtünme ve aşınma özellikleri incelenmiştir. Elde edilen sonuçlar söz konusu alaşımın ... -
The Effect of Heat Treatment on the Mechanical Properties and Oxidation Resistance of AlSi10Mg Alloy
Beder, Murat; Akçay, Serhatcan Berk; Varol, Temel; Çuvalci, Hamdullah (Springer Nature, 2024)In this study, the microstructure, hardness, tensile strength, and dry wear properties of the cast AlSi10Mg alloy as well as the effects of processing parameters on the oxidation behavior of this alloy were investigated. ... -
The effect of high B4C ratio on the improvement of mechanical properties and wear resistance of Al2024/B4C composites fabricated by mechanical milling-assisted hot pressing
Beder, Murat (Elsevier Ltd, March 2025)In this study, the effects of 0 wt% (C0), 10 wt% (C1), 20 wt% (C2) and 40 wt% (C3) B4C content on the microstructure, mechanical properties and dry wear properties of Al2024/B4C composites were investigated. In order to ... -
The effect of high SiC ratio on the physical, mechanical, tribological and corrosion behavior of Al2024 alloy matrix composites fabricated by powder metallurgy
Beder, Murat; Varol, Temel; Akçay, Serhatcan Berk; Çuvalcı, Hamdullah; Erdemir, Fatih; Khan, M Adam; Yıldız, Uğur Temel (SAGE Publications Ltd, 2025)Reinforcing materials used in the production of metal matrix composites are used to improve the properties of the final composite. However, the compatibility between matrix and reinforcement and the reinforcement ratio ... -
Effects of Mn Content on Microstructure, Mechanical and Dry Sliding Wear Properties of Eutectic Al-Si-Cu Alloy
Alemdag, Yasin; Beder, Murat (Korean Inst Metals Materials, 2020)In the present study, effects of Mn content on microstructure, hardness, tensile and dry sliding wear properties of eutectic Al-Si-Cu alloy in as cast-state were investigated. Mn addition to the eutectic alloy results in ... -
Effects of zinc content on strength and wear performance of Al-12Si-3Cu based alloy
Alemdag, Yasin; Beder, Murat (Elsevier, 2019)The effects of Zn content on strength and wear performance of Al-12Si-3Cu alloy synthesized by gravity casting were systematically investigated. The microstructure and mechanical properties of the alloys were evaluated ... -
Impact of high Al2O3 content on the microstructure, mechanical properties, and wear behavior Al–Cu–Mg/Al2O3 composites prepared by mechanical milling
Beder, Murat; Varol, Temel; Akçay, Serhatcan Berk (Elsevier Ltd, 15 October)Metal matrix composites are increasingly being recognized as new wear-resistant materials. The main purpose of this study is to investigate the microstructure, mechanical properties, and wear resistance of Al–Cu–Mg alloy ... -
Influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of Al–12Si–3Cu based alloy
Beder, Murat; Alemdağ, Y. (Nonferrous Metals Society of China, 2021)The aim of the present study was to investigate the influence of Mg addition and T6 heat treatment on microstructure, mechanical and tribological properties of the Al–Si–Cu–Mg alloys. In this context, a series of ... -
Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys
Varol, Temel; Aksa, Hüseyin Can; Yıldız, Fatih; Akçay, Serhatcan Berk; Kaya, Gürkan; Beder, Murat (Elsevier Ltd, 2024)In the study, the effect of laser energy density and post-processes (sintering, cold rolling, and hot rolling) on the properties of Co-Cr-Mo-W alloys fabricated by selective laser melting (SLM) are investigated. The samples ... -
Microstructural, mechanical and tribological properties of Al-7Si-(0-5)Zn alloys
Alemdag, Yasin; Beder, Murat (Elsevier Sci Ltd, 2014)A series of Al-7Si-(0-5)Zn alloys were produced by permanent mould casting and their microstructure, mechanical and tribological properties were investigated in as-cast state. The microstructure of Al-7Si alloy consisted ... -
Prediction of effect of fabrication parameters on the properties of B4C ceramic particle reinforced AA2024 matrix nanocomposites using neural networks
Varol, Temel; Canakcı, Aykut; Özşahin, Şükrü; Beder, Murat (Elsevier Ltd, June 2024)In the present study, a prediction model was created to predict the impact of B4C content, milling time and matrix size on the hardness and density of AA2024-B4C nanocomposites produced by means of flake powder metallurgy. ...
