Yazar "Akpinar, Salih" için listeleme
-
3-D non-linear stress analysis on the adhesively bonded T-joints with embedded supports
Akpinar, Salih; Aydin, Murat Demir; Temiz, Semsettin; Ozel, Adnan (Elsevier Sci Ltd, 2013)In the present study, it is aimed to compare mechanical behaviors of T-joint types with embedded and non-embedded supports subjected to bending moment. For this purpose, after experimental studies on the two different ... -
The Effect of Composite Patches on the Failure of Adhesively-Bonded Joints Under Bending Moment
Akpinar, Salih (Springer, 2013)In this study, it was aimed to compare mechanical behavior of double-strap joints with aluminum (AA2024-T3) or 16-ply laminate of carbon/epoxy composite (T300/934) patches of different orientation angles at their overlap ... -
Effect of protrusion at the ends of bondline in single lap joints under tension and bending
Akpinar, Salih; Temiz, Semsettin; Aydin, Murat Demir; Ozel, Adnan (Taylor & Francis Ltd, 2012)In this work, elasto-plastic stress analysis of single lap joints with and without protrusion in adhesive bondline subjected to tension and bending was carried out using 2D non-linear finite element analysis and confirmed ... -
The effect of the spew fillet on an adhesively bonded single-lap joint subjected to bending moment
Akpinar, Salih; Doru, Muhammet Onur; Ozel, Adnan; Aydin, Murat Demir; Jahanpasand, Hamed Ghaffarzadeh (Elsevier Sci Ltd, 2013)The mechanical behaviors of an adhesively bonded single lap joint with a spew fillet under bending moment, where the widths of the upper-adherend and lower-adherend are not the same, were studied experimentally and ... -
Effects of Different Curvature Patches on the Strength of Double-Strap Adhesive Joints
Akpinar, Salih (Taylor & Francis Ltd, 2013)In general, the damage in adhesively bonded joints initiates from and propagates through the ends of the overlap area due to high stress concentration in that area. The reduction of these stress concentrations results in ... -
Effects of laminate carbon/epoxy composite patches on the strength of double-strap adhesive joints: Experimental and numerical analysis
Akpinar, Salih (Elsevier Sci Ltd, 2013)In this study, mechanical properties of double-strap joints with aluminum or composite patches of different orientation angles at their overlap area were investigated under tensile loading. For this purpose, AA2024-T3 ... -
A study on 3-D stress distributions in the bi-adhesively bonded T-joints
Akpinar, Salih; Aydin, Murat Demir; Ozel, Adnan (Elsevier Science Inc, 2013)In this study, the normal (sigma(x), sigma(y), sigma(z)) and shear stress (tau(xy), tau(yz), tau(zx)) distributions occurring in a bi-adhesively bonded T-joint with was investigated via a non-linear three dimensional finite ...
