Yayıncı "Elsevier Sci Ltd" için listeleme
Toplam kayıt 71, listelenen: 61-71
-
Probiotic butter: Stability, free fatty acid composition and some quality parameters during refrigerated storage
(Elsevier Sci Ltd, 2015)This study was carried out to determine whether butter can be a carrier for probiotics by observing the survivability of selected probiotic strains during cold storage. The effects of using probiotic adjunct cultures ... -
A rapid method to detect green pea and peanut adulteration in pistachio by using portable FT-MIR and FT-NIR spectroscopy combined with chemometrics
(Elsevier Sci Ltd, 2021)In this research, the determination of green pea and peanut adulteration in pistachio by portable Fourier transform mid-infrared (FT-MIR) and Fourier transform near-infrared (FT-NIR) spectroscopy was studied. A rapid method ... -
Static resistance of axially loaded multiplanar gap KK-joints of Circular Hollow sections at elevated temperatures
(Elsevier Sci Ltd, 2021)This paper presents the results of a numerical investigation of the behaviour, and proposes a method to calculate the static resistance of axially loaded Circular Hollow Section Double K-joints (DKK) at elevated temperatures. ... -
Stochastic finite element analysis of a cable-stayed bridge system with varying material properties
(Elsevier Sci Ltd, 2010)Stochastic seismic finite element analysis of a cable-stayed bridge whose material properties are described by random fields is presented in this paper. The stochastic perturbation technique and Monte Carlo simulation (MCS) ... -
Structure and surface properties of Al2O3-TiO2 ceramic coated AZ31 magnesium alloy
(Elsevier Sci Ltd, 2016)Magnesium and its alloys are the engineering materials which have the potential ability to be able to used widely particularly in the automotive, aerospace and in the biomedical sectors, especially thanks to their features ... -
A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites
(Elsevier Sci Ltd, 2012)The flexural strength and ductility properties of cementitious composites (mortar) under high temperature may be significantly improved by incorporating different types of fibers. In this study, four different types of ... -
The synthesis and characterization of metal-free and metallophthalocyanine polymers by microwave irradiation containing diazadithia macrocyclic moieties
(Elsevier Sci Ltd, 2010)A tetranitrile monomer was synthesized by nucleophilic aromatic substitution of N,N'-(2,2'-(propane-1,3-diylbis(sulfanediyl))bis(ethane-2,1-diyl))bis(4-methylbenzenesulfonamide) onto 4-nitrophthalonitrile. A metal-free ... -
Theoretical investigation on combustion characteristics of ethanol-fueled dual-plug SI engine
(Elsevier Sci Ltd, 2019)In this study, effects of equivalence ratio, spark timing and spark plug number and locations on combustion characteristics were theoretically investigated using an ethanol-fueled dual-plug SI engine. Two-zone quasi-dimensional ... -
Thermal buckling load optimization of laminated skew plates
(Elsevier Sci Ltd, 2009)In this study thermal buckling load optimization of laminated skew plates subjected to uniformly distributed temperature load is investigated. All of the laminates considered are assumed to have fully clamped boundary ... -
Utilization of granulated marble wastes and waste bricks as mineral admixture in cemented paste backfill of sulphide-rich tailings
(Elsevier Sci Ltd, 2015)This study presents the utilisation of granulated marble wastes (MW) as an additive (10-30 wt%) and waste bricks (WB) as replacement and additive (15-45 wt%) to ordinary Portland cement (OPC) for cemented paste backfill ... -
ZnO and ZnO1-x based thin film memristors: The effects of oxygen deficiency and thickness in resistive switching behavior
(Elsevier Sci Ltd, 2017)In this study, direct-current reactive sputtered ZnO and ZnO1-x based thin film (30 nm and 300 nm in thickness) memristor devices were produced and the effects of oxygen vacancies and thickness on the memristive characteristics ...