Yayın tarihi için İnşaat Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 103, listelenen: 41-60
-
Backfill and subsoil interaction effects on seismic behavior of a cantilever wall
(Techno-Press, 2014)The main focus of the current study is to evaluate the dynamic behavior of a cantilever retaining wall considering backfill and soil/foundation interaction effects. For this purpose, a three-dimensional finite element model ... -
The comparison of different mathematical methods to determine the BOD parameters, a new developed method and impacts of these parameters variations on the design of WWTPs
(Elsevier Science Inc, 2014)One of the most common tests for the determination of strength and organic content of wastewater is the biochemical oxygen demand (BOO). This test is widely applied to define organic water pollution and to control the ... -
Suggestion of New Formulations for Schmidt Hammer and UPV Test Methods for Concrete
(Polish Acad Sciences Inst Physics, 2014)The concrete is the most widely used building material in Turkey. Especially reinforced concrete dominates at building sector. Because of concrete is an non-homogeneous and non-isotropic material, the strength of concrete ... -
Evaluation of Ground Snow Loads in Turkish Codes Via Statistical Analysis of Turkey Snow Data
(Turkish Chamber Civil Engineers, 2014)In Turkey many roofs exposed to snow loads exceeding the design snow loads are damaged or collapsed. Roof snow load specified for structural design in Turkish codes is calculated as the product of a ground snow load ... -
Elevated temperature resistance of welded tubular joints under axial load in the brace member
(Engineering Structures, 2014)This paper presents the results of a study to obtain the ultimate capacity of welded steel tubular joints at elevated temperatures. Finite Element (FE) simulations of welded tubular joints with axially loaded brace member ... -
Investigation of Freeze-Thaw Effects on Mechanical Properties of Fibre Reinforced Cement Mortars, (ISI), Volume 58, March 2014, Pages 463-472.
(Composites Part B: Engineering, 2014-03)Fibers are used for improving some properties of conventional concrete (which is a brittle material) such as tensile strength, abrasion resistance, absorption and crack control. This study investigates the usability of ... -
Reliabilities of distances describing bolt placement for high strength steel connections
(Techno-Press, 2015)In the bolted connections, bolt placements are generally described and are generally made in the direction of design effects and in the perpendicular direction to design effects. In these both directions, the reliability ... -
Effects of truss behaviour on critical temperatures of welded steel tubular truss members exposed to uniform fire
(Engineering Structures, 2015)This paper presents the results of a numerical investigation into the behaviour of welded steel tubular truss at elevated temperatures. The purpose is to assess whether the current method of calculating truss member limiting ... -
Effects of non-uniform temperature distribution on critical member temperature of steel tubular truss
(Elsevier Sci Ltd, 2016)This paper examines the effects of thermal restraint, caused by non-uniform temperature distribution in different members, on the failure temperatures of critical members of steel tubular trusses. Non-uniform temperature ... -
ANN based investigations of reliabilities of the models for concrete under triaxial compression
(2016)Purpose – A lot of triaxial compressive models for different concrete types and different concrete strength classes were proposed to be used in structural analyses. The existence of so many models creates conflicts and ... -
COMPARISON OF FEM SOLUTION WITH ANALYTICAL SOLUTION OF CONTINUOUS AND DISCONTINUOUS CONTACT PROBLEM
(Yildiz Technical Univ, 2018)The continuous and discontinuous contact problem of a homogeneous layer loaded with three rigid flat blocks and resting on the elastic semi-infinite plane was investigated in this study by using the finite element method ... -
Analytical solution to continuous contact problem for a functionally graded layer loaded through two dissimilar rigid punches
(Springer, 2018)A continuous contact problem of functionally graded layer resting on an elastic semi-infinite plane, which is loaded with through two different blocks is addressed in this study. The elasticity theory and integral ... -
YANGINDA ELİPS ENKESİTLİ EKSENEL YÜK TAŞIYAN ÇELİK KOLONLARIN DAVRANIŞI
(Uludağ University Journal of The Faculty of Engineering, 2018)Bu makale, elips enkesitli içi boş profillerden oluşmuş kolonların yüksek sıcaklıktaki davranışlarını anlamak için sayısal bir çalışmanın sonuçlarını sunmaktadır. Doğrusal olmayan sonlu elemanlar yazılımı olan ABAQUS v6.14-1 ... -
Elastik Yarı Sonsuz Düzlem Üzerine Oturan Ağırlıklı Tabakanın Sonlu Elemanlar Yöntemi Kullanılarak Sürtünmesiz Temas Problemi Analizi
(2018)Bu çalışmada, elastik yarı sonsuz düzlem üzerine oturan ve rijit iki blok ile yüklenmiş homojen tabakada sürekli temas probleminin karşılaştırmalı analizi yapılmıştır. Elastisite çözümden elde edilen sonuçlar, sonlu elemanlar ... -
Investigation of the contact problem for a partial functionally graded layer by using finite element method
(2018)The difficulty of producing functionally graded materials (FGM) and the fact that they are more expensive than homogeneous materials emerge as an industrial problem. The starting point of this study is to investigate ... -
Resistance of Axially Loaded T- and X-Joints of Elliptical Hollow Sections at Elevated Temperatures – A Finite Element Study
(Structures, 2018)This study presents the results of a numerical study to develop a method to calculate the static strength of welded Elliptical Hollow Section (EHS) joints at elevated temperatures. Extensive numerical simulations using the ... -
Experimental and numerical studies on axially loaded reinforced square hollow section T-joints
(Elsevier Sci Ltd, 2019)This paper presents outcomes of experimental and numerical studies completed on unreinforced, collar plate reinforced and doubler plate reinforced Square Hollow Section (SHS) T-joints subjected to axial compressive loading ... -
A SEQUENTIAL APPROACH BASED DESIGN OF MULTIPLE TUNED MASS DAMPERS UNDER HARMONIC EXCITATION
(Yildiz Technical Univ, 2019)This study evaluates the response reduction effect of single-degree-of-freedom (SDOF) primary systems with multiple tuned mass dampers (MTMDs) under harmonic excitation. To design MTMD, TMD properties are re-calibrated ... -
Frictionless Contact Problem for a Functionally Graded Layer Loaded Through Two Rigid Punches Using Finite Element Method
(Cambridge Univ Press, 2019)In this study, continuous contact problem in the functionally graded (FG) layer loaded with two rigid flat blocks resting on the elastic semi-infinite plane was analyzed by the finite element method. The two-dimensional ... -
Performance Comparison of Various Chicane Types: A Driving Simulator Study
(Springer International Publishing Ag, 2019)Urban streets are becoming noisy, less safe and unattractive places due to high traffic volumes and vehicular speeds. Especially, high speeds causes many problems such as traffic accidents, noise, etc. To prevent these ...