Enerji Sistemleri Mühendisliği Bölümü Koleksiyonu
Recent Submissions
-
Effects of Sintering Temperature on Microstructure and Magnetic Properties of Nd–Fe–B Magnets
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2013-05)The sintered Nd-Fe-B (neodymium-iron-boron) magnet has been used for many applications in various fields such as acoustics, communications, and automation due to its excellent properties including high remanence, high ... -
Comparative study of critical current density, pinning force and levitation force behavior in Yb211 doped-Sm123 bulk superconductors
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2012-04-15)The effect of Yb211 doping on the critical transition temperature (T-c), c-lattice parameter, critical current density (J(c)), volume pinning force (F-p) and the vertical levitation force density properties of MPMG-processed ... -
Magnetic Properties of YBCO Single-Crystal Grown on Y2O3 Layer by a Cold Top-Seeding Method
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2012-02)In this work, single-crystal samples 20 mm in diameter were grown by a cold top-seeding method. In order to study the effect of an Y2O3 buffer layer, a compacted precursor was located in a crucible on a buffer layer of ... -
The Effect of Y2O3 Buffer Layer on the Magnetic Properties of Melt-Processed YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-07)In this study, two kinds of melt-processed YBCO samples (Y1050-1 and Y1050-2) grown on a buffer layer of Y(2)O(3) addition were fabricated. The compacted powders were located on a crucible with Y(2)O(3) powder freely poured ... -
The Magnetic and Structural Properties of SiC-Doped MgB2 Bulks Prepared by the Standard Ceramic Processing
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-01)According to general formula MgB2-x SiC (x) (x=0,0.05,0.1,0.2), MgB2 and SiC-doped bulk superconductors were prepared by the standard ceramic processing. The mixtures of the corresponding powders were sintered at 750 degrees ... -
Magnetic Characterization of SiC Doped Bulk MgB2 Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-01)Flux pinning is a very significant mechanism to improve critical current density in MgB2 for many applications, such as developing the performance of wires and tapes. In this study, we have done a systematic study of SiC ... -
The Effect of Excess Y2O3 Addition on the Mechanical Properties of Melt-Processed YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2010-12)In this study, two kinds of melt-processed YBCO samples with Y2O3 addition were fabricated and their microstructures were defined by XRD analysis and polarized light optical microscopy. The mechanical properties of these ... -
Levitation force at different temperatures and superconducting properties of nano-structured MgB2 superconductors
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2010-03-04)The levitation and pinning force properties of nanocrystalline MgB2 superconductors prepared by a mechanical alloying technique with varying milling duration have been investigated. Levitation force measurements under ... -
Comparison of levitation force relative to thickness of disk shaped YBa2Cu3O7-x prepared by MPMG and FQMG processes
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2009-11-20)The precursor YBCO in the stoichiometric ratio of 1:23 were fabricated using the melt-powder-melt-growth (MPMG) technique, and flame-quench-melt-growth (FQMG) technique. The superconducting regions were determined by ... -
Complete flux jumping in nano-structured MgB2 superconductors prepared by mechanical alloying
(ELSEVIER SCIENCE SA, PO BOX 564, 1001 LAUSANNE, SWITZERLAND, 2009-07-08)High density nano-crystalline MgB2 bulk superconductors with induced pinning centres were prepared from elemental precursors by a sequence of ball milling, heat treatment, and final pressing. The XRD results revealed the ... -
Fabrication and properties of dense ex situ magnesium diboride bulk material synthesized using spark plasma sintering
(IOP PUBLISHING LTD, DIRAC HOUSE, TEMPLE BACK, BRISTOL BS1 6BE, ENGLAND, 2009-09)High density ex situ magnesium diboride bulks were synthesized from commercial MgB(2) powder using spark plasma sintering under a range of applied uniaxial pressures between 16 and 80 MPa. The microstructure was characterized ... -
The Effect of Y2O3 on AC Susceptibility Measurements of MPMG YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2013-04)In this study, two kinds of melt-powder-melt-growth (MPMG) YBCO sample grown on a buffer layer of Y2O3 addition were fabricated. The compacted powders were located on a crucible with Y2O3 powder freely poured and a buffer ...
RSS 1.0
