Ara
Toplam kayıt 24, listelenen: 11-20
Effects of the Stroke Bore Ratio on the Performance Parameters of a Dual-Spark-Ignition (DSI) Engine
(Energy & Fuels (ACS Publishers), 2009)
In this study, the effects of the stroke/bore (S/B) ratio on the performance parameters of an engine having dual-spark ignition (DSI) were investigated theoretically by using a quasi-dimensional thermodynamic cycle model. ...
Exergetic Analysis of Using Gaseous Fuels in Spark Ignition Engines
(Journal of Thermophysics and Heat Transfer (The American Institute of Aeronautics and Astronautics), 2014)
This paper aims to investigate the use of alternative gaseous fuels in spark ignition engines via an exergy analysis.A quasi-dimensional two-zone thermodynamic cycle model is used for this purpose. The intake and exhaust ...
Exergetic Analysis of Using Oxygenated Fuels in Spark-Ignition (SI) Engines
(Energy & Fuels (ACS Publications), 2009)
In this study, the use of the oxygenated fuels in spark-ignition (SI) engines has been investigated by means of exergy analysis. For this purpose, a two-zone quasi-dimensional thermodynamic cycle model was used. The cycle ...
Exergy Analysis of SI Engines
(International Journal of Exergy (Inderscience Publishers), 2008)
In this study, exergy (availability) analysis of a Spark Ignition (SI) engine has been performed theoretically during compression, combustion and expansion processes of the engine cycle. For this purpose, a thermodynamic-based ...
Comparison of Mechanical Properties Obtained for Armor Steels: Conventional Methods vs. Nanoindentation
(ASTM International, 2023)
The mechanical properties of three armor steels, namely Ramor 500, Ramor 550, and Armox Advance, were acquired by nanoindentation and conventional methods, and then the results were compared. To this goal, samples were ...
Mathematical analysis of spark ignition engine via the combination of the first and second laws of thermodynamics
(Proceedings of Royal Society A-Mathematical Physical & Engineering Sciences (Royal Society Publishing), 2008)
This study aims at the theoretical exergetic evaluation of spark ignition engine operation. For this purpose, a two-zone quasi-dimensional cycle model was installed, not considering the complex calculation of fluid motions. ...
Effect of Plastic Deformation on the Mechanical Properties of Dual-Phase Steels Using Nanoindentation
(Springer, 2023)
The mechanical properties of two advanced high-strength steels (AHSS), DP 1000 and DP 1200 dual-phase (DP) grades, under deformed and undeformed conditions, were investigated using nanoindentation, and the results were ...
Enhanced wear resistance and surface properties of oxide film coating on biocompatible Ti45Nb alloy by anodization method
(Elsevier B.V., 2023)
β-Titanium alloys have become increasingly popular as biomaterials because of their low modulus of elasticity and superior corrosion properties in recent years. β-titanium alloy containing niobium is also a biocompatible ...
Gyroscopic suspension for a heavy vehicle
(Inderscience Publishers, 2023)
In this study, an angular momentum generated by a flywheel gyroscope is performed as a suspension to prevent vehicle vibration. The frequency equations are derived and the optimal flywheel speed is obtained for vibration ...
The Effect of Surface Roughness on Fatigue Life in AZ31 Magnesium Alloy
(Springer, 2023)
Magnesium alloys have excellent properties such as high specific strength, rigidity, good damping, electromagnetic shielding, castability, and machinability. However, corrosion, creep, and fatigue resistance are generally ...