Başlık için Makine Mühendisliği Bölümü Koleksiyonu listeleme
Toplam kayıt 56, listelenen: 31-50
-
Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys
(Elsevier Ltd, 2024)In the study, the effect of laser energy density and post-processes (sintering, cold rolling, and hot rolling) on the properties of Co-Cr-Mo-W alloys fabricated by selective laser melting (SLM) are investigated. The samples ... -
Investigation of biodegradability of doped composite oxide coated AZ91 alloy in blood plasma
(Gazi University, 2022)Magnesium alloys; It is widely used in metallic biomaterials with its low toxic effect and biodegradability. Although these alloys help the formation of new tissues in the body, they provide great advantages over other ... -
Investigation of the Effect of Dual Ignition on the Exhaust Emissions of an SI Engine Operating on Different Conditions by Using Quasi-dimensional Thermodynamic Cycle Model
(Strojarstvo (Croatian Union of Mechanical Engineers and Naval Architects), 2009)In the presented study, the effects of using dual-spark plug and variation of the spark plug location on the exhaust emissions of an SI engine operating in different conditions were investigated theoretically. A quasi-dimensional ... -
Investigation of used PCM-integrated into building exterior walls for energy savings and optimization of PCM melting temperatures
(Elsevier Ltd, 2023)In the study, the effects on the building's thermal energy performance of using two different phase change materials (PCMs) integrated into the exterior walls at various thicknesses and melting temperatures have been ... -
İKİ LEVHA ARASINDAKİ LAMİNER AKIŞTA DEĞİŞKEN DUVAR KALINLIĞININ ISI TRANSFERİNE ETKİSİNİN SAYISAL ANALİZİ
(ULIBTK’03, 2003-09-03)İki paralel levha arasındaki laminer akışta değişken duvar kalınlığının ısı transferi karakteristiklerine etkisi sayısal olarak analiz edildi. Değişken duvar kalınlığı durumları, lineer ve herhangi bir serbest formda incelen ... -
KAPALI KARE ORTAMLARDA YATAY, DÜŞEY VE EĞİK İÇ BÖLMELERİN DOĞAL TAŞINIMLA ISI TRANSFERİNE ETKİSİNİN SAYISAL İNCELENMESİ
(ULIBTK’05, 2005)Kapalı kare ortamlardaki doğal taşınım, ortam içerisinde değişik konumlara iç bölmelerin yerleştirilmesi durumları için sayısal olarak incelendi. İncelenen kapalı ortamın yatay duvarlarının yalıtılmış, düşey duvarlarının ... -
Kapalı Kare Ortamlarda Periyodik Olarak Değişen Sıcaklığa Sahip Duvara Konulan Engelin Doğal Taşınım ile Isı Transferi Üzerine Etkilerinin Sayısal İncelenmesi
(6th International Advanced Technologies Symposium, 2011-05-16)Natural convection heat transfer in square enclosures having a horizontally positioned obstacle on one of the vertical wall is numerically investigated. The obstacle included wall has periodically varying temperature profile ... -
KÖŞE NOKTALARINA ENGEL YERLEŞTİRİLEN KARE KAPALI ORTAMDA DOĞAL TAŞINIMLA ISI TRANSFERİ
(19. Ulusal Isı Bilimi ve Tekniği Kongresi, ULIBTK'13, 2013-09-09)Bu çalışmada, köşe noktalarına engel yerleştirilen kare şeklindeki kapalı ortamda doğal taşınımla ısı transferi sayısal olarak incelenmiştir. Kare şeklindeki kapalı ortamın düşey yüzeyleri farklı sıcaklıklarda tutulurken ... -
Mathematical analysis of spark ignition engine via the combination of the first and second laws of thermodynamics
(Proceedings of Royal Society A-Mathematical Physical & Engineering Sciences (Royal Society Publishing), 2008)This study aims at the theoretical exergetic evaluation of spark ignition engine operation. For this purpose, a two-zone quasi-dimensional cycle model was installed, not considering the complex calculation of fluid motions. ... -
Microindentation on the porous copper surface modulations
(Springer, 2017)This study aimed to investigate the mechanical properties of a surface modulation which was realized through compaction, and then sintering of copper powders. To this goal, Berkovich type of indenter and depth-sensing ... -
NATURAL CONVECTION HEAT TRANSFER IN A PARTIALLY DIVIDED TRAPEZOIDAL ENCLOSURE
(THERMAL SCIENCE, 2009)Nat u ral con vec tion heat trans fer in a par tially di vided trap e zoidal en clo sure is stud ied nu mer i cally us ing the con trol vol ume method. Sum mer and win ter con di - tions are sep a rately ex am ined by im ... -
Optimization insulation thickness and reduction of CO2 emissions for pipes in all generation district heating networks
(SAGE PUBLICATIONS LTD, 2022)District heating systems are provided solutions for the increasing energy problems in high-population cities. Energy costs go up depending on increasing heat loss in DHS's distribution network. Heat loss from the network ... -
Optimum Tuning of a Gyroscopic Vibration Absorber for Vibration Control of a Vertical Cantilever Beam with Tip Mass
(Int Inst Acoustics & Vibration, 2019)In this paper, a symmetric gyro with coupling to the tip mass of a beam mounted on a vibrating base is considered. Taking advantage of the angular momentum of the rotating gyroscope, gyrostabilizer systems are expected to ... -
PERİYODİK OLARAK DEĞİŞEN SICAKLIĞA SAHİP KAPALI KARE ORTAMLARA KONULAN ENGELLERİN DOĞAL TAŞINIMLA ISI TRANSFERİ ÜZERİNE ETKİLERİNİN SAYISAL İNCELENMESİ
(X. ULUSAL TESİSAT MÜHENDİSLİĞİ KONGRESİ, TESKON2011, 2011-04-13)Düşey duvarlarından birinde yatay bir engelin konumlandırıldığı kare ortamlarda doğal taşınımla ısı transferi incelenmiştir. Engelin bulunduğu duvar sabit sıcaklıkta tutulmaktadır ve diğer düşey duvardaki sınır koşulu ... -
Preparation and characterization of electroless Ni–B/nano-SiO2, Al2O3, TiO2 and CuO composite coatings
(2015-06-18)Ni–B/SiO2, Al2O3, TiO2 and CuO composite coatings were successfully obtained by the electroless plating technique. Dispersible SiO2, Al2O3, TiO2 and CuO nanoparticles were co-deposited with electroless Ni–B coating onto ... -
SINIR ŞARTLARININ KAPALI ORTAMLARDAKİ DOĞAL TAŞINIMLA ISI TRANSFERİ VE SICAKLIK DAĞILIMINA ETKİSİNİN SAYISAL ANALİZİ
(IX. Ulusal Tesisat Mühendisliği Kongresi TESKON, 2009)Kapalı kare ortamlardaki doğal taşınım, ortamın düşey duvarlarından birine farklı sınır koşulu uygulanması durumu için sayısal olarak incelendi. İncelenen kapalı ortamın yatay duvarlarının yalıtılmış, düşey duvarlarından ... -
Strength Analysis in Bonded, Bolted and Bolted-Bonded Joints, Single Lap Joints, Metal/Composite Plates
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)Today, especially in many fields that require structural durability, such as the aerospace and automotive industries, there has been a need to use different bonding techniques separately or together in order to use materials ... -
Theoretical analysis the use of dimethyl ether and diethyl ether in a diesel engine
(Sila Science, 2011)In this study, the use of dimethyl ether (DME) and diethyl ether (DEE) in diesel engines as alternative fuels investigated. A commercial suction (naturally-aspirated) direct injection (SDI) automobile diesel engine was ... -
Thermodynamic, performance and emission investigation of a diesel engine running on dimethyl ether and diethyl ether
(Elsevier France-Editions Scientifiques Medicales Elsevier, 2011)This study investigates the use of dimethyl ether and diethyl ether in diesel engines as alternative fuels. A direct injection diesel engine was simulated via a thermodynamic cycle model for investigation. Thermodynamic ... -
Trabzon İli İçin Dış Ortam Sıcaklığının İç Ortamdaki Doğal Taşınımla Isı Transferine Etkisinin Sayısal Analizi
(17.Ulusal Isı Bilimi ve Tekniği Kongresi ULIBTK09, 2009-06-24)Kapalı bir kare ortamda sıcaklık dağılımı ve buna bağlı olan doğal taşınım mekanizması sınır koşullarına oldukça duyarlıdır. Ortam içersindeki hız ve sıcaklık dağılımları iki önemli ısıl konfor parametresidir ve bu ...