Tür "article" Makine Mühendisliği Bölümü Koleksiyonu için listeleme
Toplam kayıt 45, listelenen: 21-40
-
Exergetic Analysis of Using Gaseous Fuels in Spark Ignition Engines
(Journal of Thermophysics and Heat Transfer (The American Institute of Aeronautics and Astronautics), 2014)This paper aims to investigate the use of alternative gaseous fuels in spark ignition engines via an exergy analysis.A quasi-dimensional two-zone thermodynamic cycle model is used for this purpose. The intake and exhaust ... -
Exergetic Analysis of Using Oxygenated Fuels in Spark-Ignition (SI) Engines
(Energy & Fuels (ACS Publications), 2009)In this study, the use of the oxygenated fuels in spark-ignition (SI) engines has been investigated by means of exergy analysis. For this purpose, a two-zone quasi-dimensional thermodynamic cycle model was used. The cycle ... -
Exergetic Evaluation of Speed and Load Effects in Spark Ignition Engines
(Edp Sciences S A, 2012)Exergetic Evaluation of Speed and Load Effects in Spark Ignition Engines This study investigates the effects of various operating conditions in spark ignition engines via an exergy analysis. A thermodynamic cycle model ... -
Exergy Analysis of SI Engines
(International Journal of Exergy (Inderscience Publishers), 2008)In this study, exergy (availability) analysis of a Spark Ignition (SI) engine has been performed theoretically during compression, combustion and expansion processes of the engine cycle. For this purpose, a thermodynamic-based ... -
GÜN İÇERİSİNDEKİ GÜNEŞ IŞINIMININ KAPALI ORTAMLARDAKİ DOĞAL TAŞINIMLA ISI TRANSFERİ ÜZERİNE ETKİLERİNİN SAYISAL İNCELENMESİ
(Türk Tesisat Mühendisleri Derneği, 2008-05-12)İki boyutlu kapalı ortamlarda yaz ve kış sınır koşullarında, güneş ışınımından kaynaklanan doğal taşınımla ısı transferi sayısal olarak incelenmiştir. Işınım alan yüzey için zamana bağlı periyodik olarak değişen bir sıcaklık ... -
Gyroscopic suspension for a heavy vehicle
(Inderscience Publishers, 2023)In this study, an angular momentum generated by a flywheel gyroscope is performed as a suspension to prevent vehicle vibration. The frequency equations are derived and the optimal flywheel speed is obtained for vibration ... -
High-cycle fatigue and tensile strength of AZ91 Mg alloy with MAO-epoxy duplex coating
(Institute of Materials and Machine Mechanics, 2023)In this study, an epoxy layer was formed by the immersion process, on the oxide layer grown by the micro-arc oxidation (MAO) treatment of the AZ91 magnesium alloy, using the thin film sealing technology, and its effect on ... -
Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys
(Elsevier Ltd, 2024)In the study, the effect of laser energy density and post-processes (sintering, cold rolling, and hot rolling) on the properties of Co-Cr-Mo-W alloys fabricated by selective laser melting (SLM) are investigated. The samples ... -
Investigation of biodegradability of doped composite oxide coated AZ91 alloy in blood plasma
(Gazi University, 2022)Magnesium alloys; It is widely used in metallic biomaterials with its low toxic effect and biodegradability. Although these alloys help the formation of new tissues in the body, they provide great advantages over other ... -
Investigation of the Effect of Dual Ignition on the Exhaust Emissions of an SI Engine Operating on Different Conditions by Using Quasi-dimensional Thermodynamic Cycle Model
(Strojarstvo (Croatian Union of Mechanical Engineers and Naval Architects), 2009)In the presented study, the effects of using dual-spark plug and variation of the spark plug location on the exhaust emissions of an SI engine operating in different conditions were investigated theoretically. A quasi-dimensional ... -
Investigation of used PCM-integrated into building exterior walls for energy savings and optimization of PCM melting temperatures
(Elsevier Ltd, 2023)In the study, the effects on the building's thermal energy performance of using two different phase change materials (PCMs) integrated into the exterior walls at various thicknesses and melting temperatures have been ... -
Kapalı Kare Ortamlarda Periyodik Olarak Değişen Sıcaklığa Sahip Duvara Konulan Engelin Doğal Taşınım ile Isı Transferi Üzerine Etkilerinin Sayısal İncelenmesi
(6th International Advanced Technologies Symposium, 2011-05-16)Natural convection heat transfer in square enclosures having a horizontally positioned obstacle on one of the vertical wall is numerically investigated. The obstacle included wall has periodically varying temperature profile ... -
Mathematical analysis of spark ignition engine via the combination of the first and second laws of thermodynamics
(Proceedings of Royal Society A-Mathematical Physical & Engineering Sciences (Royal Society Publishing), 2008)This study aims at the theoretical exergetic evaluation of spark ignition engine operation. For this purpose, a two-zone quasi-dimensional cycle model was installed, not considering the complex calculation of fluid motions. ... -
Microindentation on the porous copper surface modulations
(Springer, 2017)This study aimed to investigate the mechanical properties of a surface modulation which was realized through compaction, and then sintering of copper powders. To this goal, Berkovich type of indenter and depth-sensing ... -
NATURAL CONVECTION HEAT TRANSFER IN A PARTIALLY DIVIDED TRAPEZOIDAL ENCLOSURE
(THERMAL SCIENCE, 2009)Nat u ral con vec tion heat trans fer in a par tially di vided trap e zoidal en clo sure is stud ied nu mer i cally us ing the con trol vol ume method. Sum mer and win ter con di - tions are sep a rately ex am ined by im ... -
Optimization insulation thickness and reduction of CO2 emissions for pipes in all generation district heating networks
(SAGE PUBLICATIONS LTD, 2022)District heating systems are provided solutions for the increasing energy problems in high-population cities. Energy costs go up depending on increasing heat loss in DHS's distribution network. Heat loss from the network ... -
Optimum Tuning of a Gyroscopic Vibration Absorber for Vibration Control of a Vertical Cantilever Beam with Tip Mass
(Int Inst Acoustics & Vibration, 2019)In this paper, a symmetric gyro with coupling to the tip mass of a beam mounted on a vibrating base is considered. Taking advantage of the angular momentum of the rotating gyroscope, gyrostabilizer systems are expected to ... -
Preparation and characterization of electroless Ni–B/nano-SiO2, Al2O3, TiO2 and CuO composite coatings
(2015-06-18)Ni–B/SiO2, Al2O3, TiO2 and CuO composite coatings were successfully obtained by the electroless plating technique. Dispersible SiO2, Al2O3, TiO2 and CuO nanoparticles were co-deposited with electroless Ni–B coating onto ... -
Strength Analysis in Bonded, Bolted and Bolted-Bonded Joints, Single Lap Joints, Metal/Composite Plates
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)Today, especially in many fields that require structural durability, such as the aerospace and automotive industries, there has been a need to use different bonding techniques separately or together in order to use materials ... -
Theoretical analysis the use of dimethyl ether and diethyl ether in a diesel engine
(Sila Science, 2011)In this study, the use of dimethyl ether (DME) and diethyl ether (DEE) in diesel engines as alternative fuels investigated. A commercial suction (naturally-aspirated) direct injection (SDI) automobile diesel engine was ...