Ara
Toplam kayıt 14, listelenen: 1-10
Pushover and nonlinear time history analysis evaluation of a RC building collapsed during the Van (Turkey) earthquake on October 23, 2011
(Springer, 2014)
The nonlinear seismic behavior of a collapsed reinforced concrete (RC) residential building in the city of Van in Turkey is investigated by the static pushover and nonlinear time history analyses. The selected RC structure ...
Investigation of abrasion resistance of cement mortar with different pozzolanic compositions and subjected to sulfated medium
(Elsevier Sci Ltd, 2010)
The durability phenomenon for concrete, or cement mortar, has gained attention recently as one of the important mechanical properties. It can be described as concrete's resistance to the destructive influences of a medium ...
A study on the effects of high temperature on mechanical properties of fiber reinforced cementitious composites
(Elsevier Sci Ltd, 2012)
The flexural strength and ductility properties of cementitious composites (mortar) under high temperature may be significantly improved by incorporating different types of fibers. In this study, four different types of ...
Experimental and numerical studies on axially loaded reinforced square hollow section T-joints
(Elsevier Sci Ltd, 2019)
This paper presents outcomes of experimental and numerical studies completed on unreinforced, collar plate reinforced and doubler plate reinforced Square Hollow Section (SHS) T-joints subjected to axial compressive loading ...
Reliabilities of distances describing bolt placement for high strength steel connections
(Techno-Press, 2015)
In the bolted connections, bolt placements are generally described and are generally made in the direction of design effects and in the perpendicular direction to design effects. In these both directions, the reliability ...
Abrasion Resistance of Cement Mortar with Different Pozzolanic Compositions and Matrices
(Asce-Amer Soc Civil Engineers, 2011)
Abrasion of concrete occurs due to scraping, rubbing, skidding, or sliding of objects on its surface. The abrasion resistance of concrete is influenced by a number of factors, such as compressive strength, surfacing finish, ...
A SEQUENTIAL APPROACH BASED DESIGN OF MULTIPLE TUNED MASS DAMPERS UNDER HARMONIC EXCITATION
(Yildiz Technical Univ, 2019)
This study evaluates the response reduction effect of single-degree-of-freedom (SDOF) primary systems with multiple tuned mass dampers (MTMDs) under harmonic excitation. To design MTMD, TMD properties are re-calibrated ...
The effects of high temperature on mechanical properties of cementitious composites reinforced with polymeric fibers
(Elsevier Sci Ltd, 2013)
Polymeric fibers are cheap and popular materials used in the concrete industry, and they may improve the mechanical properties of cementitious composites under high temperature. In this study, three different types of ...
Investigation of mechanical and mineralogical properties of mortars subjected to sulfate
(Elsevier Sci Ltd, 2010)
The durability can be described as concrete's resistance to the destructive influences of a medium containing acid, sulfate and/or various chemicals and mechanical effects. The main objective of this study is investigation ...
Probabilistic sensitivity analysis of suspension bridges to near-fault ground motion
(Techno-Press, 2013)
The sensitivities of a structural response due to variation of its design parameters are prerequisite in the majority of the algorithms used for fundamental problems in engineering as system uncertainties, identification ...