Ara
Toplam kayıt 21, listelenen: 11-20
Gyroscopic suspension for a heavy vehicle
(Inderscience Publishers, 2023)
In this study, an angular momentum generated by a flywheel gyroscope is performed as a suspension to prevent vehicle vibration. The frequency equations are derived and the optimal flywheel speed is obtained for vibration ...
The Effect of Surface Roughness on Fatigue Life in AZ31 Magnesium Alloy
(Springer, 2023)
Magnesium alloys have excellent properties such as high specific strength, rigidity, good damping, electromagnetic shielding, castability, and machinability. However, corrosion, creep, and fatigue resistance are generally ...
Effect of Isothermal Treatment on Mechanical and Tribological Properties of Alloy Zn – 40% Al – 2% Cu – 2% Si
(Springer, 2023)
The effect of isothermal exposure at temperatures from 100°C to 250°C for 8 hours on the structure, mechanical and tribological properties of the Zn – 40% Al – 2% Cu – 2% Si alloy produced by chill casting is studied. The ...
Strength Analysis in Bonded, Bolted and Bolted-Bonded Joints, Single Lap Joints, Metal/Composite Plates
(Multidisciplinary Digital Publishing Institute (MDPI), 2023)
Today, especially in many fields that require structural durability, such as the aerospace and automotive industries, there has been a need to use different bonding techniques separately or together in order to use materials ...
Effect of thickness and melting temperature of phase change material integrated into exterior wall on building energy performance and CO2 emission reduction
(Gazi Universitesi, 2024)
In the study, the effect of phase change materials integrated into the building's external wall has been investigated in terms of material type, thickness, and melting temperature of phase change material on the building ...
Influence of nickel addition on the microstructure, mechanical, and wear properties of Zn-40Al-2Cu alloy
(John Wiley and Sons Inc, March 2024)
To study the influence of nickel addition on the microstructure, mechanical and lubricated wear properties of Zn-40Al-2Cu alloy, one ternary and five quaternary Zn-40Al-2Cu-(0.5-2.5)Ni alloys were made by permanent mold ...
Investigation of friction behavior of TiO2: Al2O3 composite coating formed on AA2024 alloy by micro-arc oxidation
(Yildiz Technical University, February 2)
In this study, an alumina (Al2O3) ceramic coating and a composite coating containing titanium dioxide (TiO2) particles were prepared on surfaces of AA2024 substrates by micro-arc oxidation (MAO) treatment. The effects of ...
The Effect of Heat Treatment on the Mechanical Properties and Oxidation Resistance of AlSi10Mg Alloy
(Springer Nature, 2024)
In this study, the microstructure, hardness, tensile strength, and dry wear properties of the cast AlSi10Mg alloy as well as the effects of processing parameters on the oxidation behavior of this alloy were investigated. ...
Influence of post processing on the mechanical properties and wear behavior of selective laser melted Co-Cr-Mo-W alloys
(Elsevier Ltd, 2024)
In the study, the effect of laser energy density and post-processes (sintering, cold rolling, and hot rolling) on the properties of Co-Cr-Mo-W alloys fabricated by selective laser melting (SLM) are investigated. The samples ...
Damage assessment of Siverek Castle during the Kahramanmaraş Earthquakes (Mw 7.7 and Mw 7.6) on 06 February 2023: Remediation and strengthening proposals
(Elsevier B.V., May 2024)
On February 6, 2023, two significant earthquakes with magnitudes (Mw) of 7.7 and 7.6 struck Turkey, occurring nine hours apart. In addition to the tragic loss of over 50,000 lives in the earthquakes centered in Kahramanmaraş, ...