Başlık için Mühendislik ve Doğa Bilimleri Fakültesi listeleme
Toplam kayıt 697, listelenen: 175-194
-
Effect of Quench-Ageing on Microstructural Evolution and Damping Behaviour of Zn-27Al-1Cu Alloy
(ISLAC’18 “1st International Symposium on Light Alloys and Composite Materials", 2018-03-22)A ternary Zn-27Al-1Cu alloy was prepared by permanent mould casting. The microstructural evolution and damping behaviour of the Zn-27Al-1Cu alloy were investigated in different periods of ageing after subjected to solution ... -
Effect of Reduced Fineness of Fly Ash Used on the Alkali-Silica Reaction (ASR) of Concrete
(SPRINGER INT PUBL AG, 2023)This study aimed to determine the effect of fly ash added to concrete with high calcium content (C class) and different fineness on durability properties such as the alkali-silica reaction (ASR). By substituting ultra-fine ... -
The Effect of Surface Morphology of Silver Nanoparticles on the Selectivity of Styrene Epoxidation
(World Scientific, 2022)Catalytic materials at the nanoscale level have an enormous impact on sustainable environmental protection, which is important for the future. Therefore, the researchers will intensively carry out the design of catalytic ... -
The Effect of Surface Roughness on Fatigue Life in AZ31 Magnesium Alloy
(Springer, 2023)Magnesium alloys have excellent properties such as high specific strength, rigidity, good damping, electromagnetic shielding, castability, and machinability. However, corrosion, creep, and fatigue resistance are generally ... -
The effect of the surface morphology of the aluminium oxide layer on the physical and bacterial attachment behavior
(Institute of Physics, 2023)Coating of the metal surface for different fields such as corrosion resistance, hydrophobic surface, and conductivity properties enhance the material quality for different application. Furthermore, controlling the morphological ... -
Effect of thickness and melting temperature of phase change material integrated into exterior wall on building energy performance and CO2 emission reduction
(Gazi Universitesi, 2024)In the study, the effect of phase change materials integrated into the building's external wall has been investigated in terms of material type, thickness, and melting temperature of phase change material on the building ... -
The effect of tourism and legalization policies on summer pasture in Turkey
(Murat Yakar, 2022)In Turkey, according to Pasture Law, land allocated for farmers to spend the summer with their animals, graze their animals and benefit from grass is defined as “summer pasture (yaylak in Turkish).” Summer pasture is of ... -
Effect of Using Green Tea (Camellia sinensis L.) Powder and Probiotic Bacteria on Probiotic Shelf Life and Quality Properties of Ice Cream
(Sidas Medya A.S., 2022)In this study, the effect of green tea powder (GTP) in ice cream production on the ice cream properties and viability of probiotic bacteria [Bifidobacterium animalis ssp. lactis (Bifidobacterium BB-12) (P)] was investigated. ... -
Effect of Working Conditions on the Lubricated Wear Behavior of Zn-40Al-2Cu-2Si Alloy in the As- Cast and T6 Heat-Treated States
(American Society of Mechanical Engineers (ASME), 2022)In order to determine the effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-cast and T6 heat-treated states, its tribological properties were studied at different oil flowrates, ... -
Effect of Working Conditions on the Lubricated Wear Behavior of Zn-40Al-2Cu-2Si Alloy in the As-Cast and T6 Heat-Treated States
(ASME, 2022)In order to determine the effect of working conditions on the lubricated wear behavior of Zn-40Al-2Cu-2Si alloy in the as-cast and T6 heat-treated states, its tribological properties were studied at different oil flowrates, ... -
The Effect of Y2O3 Buffer Layer on the Magnetic Properties of Melt-Processed YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2011-07)In this study, two kinds of melt-processed YBCO samples (Y1050-1 and Y1050-2) grown on a buffer layer of Y(2)O(3) addition were fabricated. The compacted powders were located on a crucible with Y(2)O(3) powder freely poured ... -
The Effect of Y2O3 on AC Susceptibility Measurements of MPMG YBCO Superconductor
(SPRINGER, 233 SPRING ST, NEW YORK, NY 10013 USA, 2013-04)In this study, two kinds of melt-powder-melt-growth (MPMG) YBCO sample grown on a buffer layer of Y2O3 addition were fabricated. The compacted powders were located on a crucible with Y2O3 powder freely poured and a buffer ... -
Effective atomic numbers and electron densities of CuGaSe2 semiconductor in the energy range 6-511 keV
(JOHN WILEY & SONS LTD, THE ATRIUM, SOUTHERN GATE, CHICHESTER PO19 8SQ, W SUSSEX, ENGLAND, 2008-09)The effective atomic numbers and electron densities of the CuGaSe2 semiconductor were calculated at 29 different energies from 6.9 to 511.0 keV by using the measured mass attenuation coefficients. Also, the mass attenuation ... -
The effects of beeswax coating on quality of Kashar cheese during ripening
(International Journal of Food Science and Technology, 2012-06)The aim of this study was to evaluate the effects of the application of beeswax coating on the microbiological, physicochemical and sensory properties of Kashar cheese during ripening (120 day). Kashar cheeses were coated ... -
Effects of charge properties on exergy balance in spark ignition engines
(Elsevier Sci Ltd, 2013)This study investigates the effects of the air-fuel mixture (charge) properties on the exergy balance in spark ignition engines. A thermodynamic cycle model including compression, combustion and expansion processes is used. ... -
Effects of discretization schemes on numerical results of natural convection heat transfer
(Amer Inst Physics, 2014)Two dimensional natural convection heat transfer in a square enclosure is numerically analyzed. Laminar natural-convection heat transfer is studied by solving the Navier-Stokes and energy equations using finite volume ... -
The effects of high temperature on mechanical properties of cementitious composites reinforced with polymeric fibers
(Elsevier Sci Ltd, 2013)Polymeric fibers are cheap and popular materials used in the concrete industry, and they may improve the mechanical properties of cementitious composites under high temperature. In this study, three different types of ... -
Effects of Methanol Addition to Gasoline on the Performance and Fuel Cost of a Spark Ignition Engine
(Energy & Fuels (ACS Publishers), 2008)This study is concerned with investigating experimentally the effects of methanol blending to base gasoline on the performance and fuel cost of a spark ignition (SI) engine. The fuel blends were prepared by blending 5, 10, ... -
Effects of Methyl tert-Butyl Ether Addition to Base Gasoline on the Performance and CO Emissions of a SI Engine
(Energy & Fuels (ACS Publications), 2008)This study aims at investigating experimentally the effects of methyl tert-butyl ether (MTBE)-gasoline blends on the performance and CO emissions of a spark ignition engine. The blends are prepared by blending 5, 10, 15, ... -
Effects of non-uniform temperature distribution on critical member temperature of steel tubular truss
(Elsevier Sci Ltd, 2016)This paper examines the effects of thermal restraint, caused by non-uniform temperature distribution in different members, on the failure temperatures of critical members of steel tubular trusses. Non-uniform temperature ...
